![]() Because this requires opening the computer case, we advice you to contact your PC manufacturer for specific instructions. Wake-On-LAN (WOL) Cableįor Wake On LAN to work on computers with older PCI busses, a WOL cable must be installed between the Network Card and the Motherboard. For example in Windows 2000, click Power Management tab and under the Adapters properties, select the option Allow this device to bring the computer out of standby.Īlternatively, you can also check the Advanced setting table for parameters related to Wake on LAN and Waking on "Magic Packets" and enable them. In some Windows OS, the drivers can enable the Wake ON LAN features of network adapters. Enable settings related to Power Up on PCI card, LAN, or Network.During the computer’s power-on self-test enter the BIOS setting screen by pressing the F1, INS, or DEL keys. ![]() For Mac users: Make sure the Wake for network access option is selected in the Energy Saver settings. Configure your LAN network interface adapter (Control Panel-> Device Manager-> Network adapters). The most common method adopted across different PC's are as follows: Enable Wake-on-LAN in the system BIOS if you want to allow your computer to wake from a powered-off (i.e., Hibernate) state. ![]() The option to enable Wake-On-LAN is different with each computer manufacturer. The Wake-On-LAN functionality is generally disabled by default. Specify the IP address and MAC address(physical address) of the computer you want to wake up.Select the Domain name available in the left pane.To know about setting up the tool click here.
0 Comments
Leave a Reply. |